通达信指标公式仿V型反转主图，送与大家，喜欢就拿去吧

原创是高人，既然说仿，那就没有百分之百的相似，图形相似，里面的内容可不一样了，百家争鸣，各有各说法，大家尽情发表自己的看法，有待优化
有人提到DRAWLINE 函数，在主图中只是画直线，并无影响其他信号飘移

Z1:=STRCAT(HYBLOCK,' ');
Z2:=STRCAT(Z1,DYBLOCK);
Z3:=STRCAT(Z2,' ');
DRAWTEXT_FIX(ISLASTBAR,0,0,0,STRCAT(Z3,GNBLOCK)),COLORRED;
DRAWTEXT_FIX(ISLASTBAR,0.001,0.050,0,GNBLOCK),COLORCYAN;{概念};
ZT:=REF(C,1)*1.1-C<0.01 AND H=C;{涨停}
AA:=MA((2*CLOSE+HIGH+LOW)/4,5);
通1:=AA*102/100;
通2:=AA*(200-102)/100;
CC:=ABS((2*CLOSE+HIGH+LOW)/4-MA(CLOSE,20))/MA(CLOSE,20);
DD:=DMA(CLOSE,CC);
上:(1+7/100)*DD,DOTLINE,COLORGREEN;
下:(1-7/100)*DD,DOTLINE,COLORGREEN;
中:(上+下)/2,DOTLINE,COLORGREEN;
IF((上 <= REF(上,1)),上,DRAWNULL),COLORGREEN,DOTLINE;
IF((上 > REF(上,1)),上,DRAWNULL),COLORRED,DOTLINE;
IF((中 <= REF(中,1)),中,DRAWNULL),COLORGREEN,DOTLINE;
IF((中 > REF(中,1)),中,DRAWNULL),COLORRED,DOTLINE;
IF((下 <= REF(下,1)),下,DRAWNULL),COLORGREEN,DOTLINE;
IF((下 > REF(下,1)),下,DRAWNULL),COLORRED,DOTLINE;
顶:=(1+14/100)*DD,LINETHICK2,COLORBLACK;
底:=(1-14/100)*DD,LINETHICK2,COLORBLACK;
触底:=REF(L,1)<底 AND ZT ;
DRAWTEXT(触底,L,'反转'),COLORCYAN;
STICKLINE(触底,C,O,3,1),COLORYELLOW;
STICKLINE(触底,C,O,1,0),COLORRED;
DF:=(C-REF(C,1))/REF(C,1)*100<-5;
DF4:=(C-O)/O*100<-4;
AAAA:=BARSLAST(DF);
突破箱体:=CROSS(C,REF(C,AAAA));
箱顶:DRAWLINE(DF,O,REF(DF,1),REF(O,1),1),COLORMAGENTA,LINETHICK2;
箱顶1:DRAWLINE(DF4,O,REF(DF4,1),REF(O,1),1),COLORMAGENTA,LINETHICK2;

JRH:=HHV(C,2);
JRL:=LLV(C,2);
MA3:=MA(CLOSE,3);
YTSL:=(3*CLOSE+LOW+OPEN+HIGH)/6;
VAR1:=(CLOSE>REF(CLOSE,1) AND CLOSE>REF(CLOSE,2));
VAR2:=(REF(VAR1,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR3:=(REF(VAR2,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR4:=(REF(VAR3,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR5:=(REF(VAR4,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR6:=(REF(VAR5,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR7:=(REF(VAR6,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR8:=(REF(VAR7,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR9:=(REF(VAR8,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VARA:=(REF(VAR9,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VARB:=(REF(VARA,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VARC:=(REF(VARB,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VARD:=(CLOSE VARE:=(REF(VARD,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VARF:=(REF(VARE,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR10:=(REF(VARF,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR11:=(REF(VAR10,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR12:=(REF(VAR11,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR13:=(REF(VAR12,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR14:=(REF(VAR13,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR15:=(REF(VAR14,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR16:=(REF(VAR15,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR17:=(REF(VAR16,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR18:=(REF(VAR17,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR19:=((REF(VARD OR V